Interface: SANDAG Virtual TMCs - Caltrans D11 Field Equipment

SANDAG Virtual TMCs to Caltrans D11 Field Equipment Interface Diagram

Information Flow Definitions

automated lane control data  (Planned)  

Control commands and operating parameters for automated vehicle operations, including tightly coupled platooned groups of vehicles operating in dedicated or mixed–mode lanes. This flow includes platoon parameters including maximum platoon size, target speeds and gaps, and vehicle restrictions.

automated lane status  (Planned)  

Current operational status of lanes supporting automated vehicle operations. The flow includes the status of the RSEs, associated field equipment, and vehicles using the facility.

barrier system control  (Existing)  

Information used to configure and control barrier systems that are represented by gates, barriers and other automated or remotely controlled systems used to manage entry to roadways.

barrier system status  (Existing)  

Current operating status of barrier systems. Barrier systems represent gates, barriers and other automated or remotely controlled systems used to manage entry to roadways. Status of the systems includes operating condition and current operational state.

environmental monitoring application info  (Existing)  

Environmental monitoring application parameters and thresholds that control the filtering, aggregation, and range of measures that are collected, derived, and reported. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

environmental monitoring application status  (Existing)  

Environmental monitoring application status reported by the RSE. This includes current operational state and status of the RSE and a record of system operation.

environmental sensor data  (Existing)  

Current road conditions (e.g., surface temperature, subsurface temperature, moisture, icing, treatment status) and surface weather conditions (e.g., air temperature, wind speed, precipitation, visibility) as measured and reported by fixed and/or mobile environmental sensors. Operational status of the sensors is also included.

environmental sensors control  (Existing)  

Data used to configure and control environmental sensors.

environmental situation data  (Existing)  

Aggregated and filtered vehicle environmental data collected from vehicle safety and convenience systems including measured air temperature, exterior light status, wiper status, sun sensor status, rain sensor status, traction control status, anti–lock brake status, and other collected vehicle system status and sensor information. This information flow represents the aggregated and filtered environmental data sets that are provided by the RSE to the back office center. Depending on the RSE configuration and implementation, the data set may also include environmental sensor station data collected by the RSE.

intersection management application info  (Planned)  

Intersection and device configuration data, including intersection geometry, and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

intersection management application status  (Planned)  

Infrastructure application status reported by the RSE. This includes current operational state and status of the RSE and a log of operations.

lane management control  (Existing)  

Information used to configure and control dynamic lane management systems.

lane management information  (Existing)  

System status of managed lanes including current operational state, violations, and logged information. This includes lane usage information including both traditional traffic flow measures and special information associated with managed lanes such as measured passenger occupancies. It also includes the operational status of the lane management equipment.

queue warning application information  (Planned)  

Information regarding formed or impending queues (location of the end of queue, estimated duration of the queue, and other descriptions of the queue condition) and recommendations for upstream vehicles including speed reduction, lane change, or diversion recommendations. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

queue warning application status  (Planned)  

Queue warning application status reported by the RSE. This includes current operational state and status of the RSE and a record of measured vehicle speeds and identified queues.

restricted lanes application info  (Existing)  

Restricted lane application configuration data and messaging parameters. This flow defines the location, duration, and operating parameters for lanes that are reserved for the exclusive use of certain types of vehicles (e.g., transit vehicles) or vehicles that meet other qualifications (e.g., number of occupants, low emissions criteria). It may also identify additional vehicles that may be allowed in the lanes as exceptions, though they don't meet specified criteria. It identifies the lane(s), the start and stop locations, start and end times, vehicle restrictions, speed limits and platooning parameters. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

restricted lanes application status  (Existing)  

Current RSE application status that is monitored by the back office center including the operational state of the RSE, current configuration parameters, and a log of lane use (aggregate profiles of vehicles that checked in to the lane and reported vehicle speeds in the lanes) and RSE communications activity.

right-of-way request notification  (Planned)  

Notice that a request has occurred for signal prioritization, signal preemption, pedestrian call, multi–modal crossing activation, or other source for right–of–way.

road closure application info  (Existing)  

Road closure signing application configuration data and messaging parameters. This flow identifies the vehicles that may initiate the road closure. This flow also provides access lists, groups, or classifications where selected vehicles are to be allowed access to the closed area.

road closure application status  (Existing)  

Road closure application status reported by the RSE. This includes current operational state and status of the RSE, closure status, and a log of closure commands received and issued. For closures that allow entry by selected vehicles, this flow provides an access log identifying vehicles that have requested access with access status.

roadway advisory radio data  (Existing)  

Information used to initialize, configure, and control roadside highway advisory radio. This flow can provide message content and delivery attributes, local message store maintenance requests, control mode commands, status queries, and all other commands and associated parameters that support remote management of these systems.

roadway advisory radio status  (Existing)  

Current operating status of highway advisory radios.

roadway dynamic signage data  (Existing)  

Information used to initialize, configure, and control dynamic message signs. This flow can provide message content and delivery attributes, local message store maintenance requests, control mode commands, status queries, and all other commands and associated parameters that support remote management of these devices.

roadway dynamic signage status  (Existing)  

Current operating status of dynamic message signs.

roadway warning system control  (Planned)  

Information used to configure and control roadway warning systems.

roadway warning system status  (Planned)  

Current operating status of roadway warning systems.

shoulder management control  (Planned)  

Information used to configure and control systems that allow use of a shoulder as a lane for vehicular traffic.

shoulder management information  (Planned)  

System status including current operational state, violations and logged information.

signal control commands  (Planned)  

Control of traffic signal controllers or field masters including clock synchronization.

signal control device configuration  (Planned)  

Data used to configure traffic signal control equipment including local controllers and system masters.

signal control plans  (Planned)  

Traffic signal timing parameters including minimum green time and interval durations for basic operation and cycle length, splits, offset, phase sequence, etc. for coordinated systems.

signal control status  (Planned)  

Operational and status data of traffic signal control equipment including operating condition and current indications.

signal fault data  (Planned)  

Faults reported by traffic signal control equipment.

signal system configuration  (Planned)  

Data used to configure traffic signal systems including configuring control sections and mode of operation (time based or traffic responsive).

traffic detector control  (Existing)  

Information used to configure and control traffic detector systems such as inductive loop detectors and machine vision sensors.

traffic detector data  (Existing)  

Raw and/or processed traffic detector data which allows derivation of traffic flow variables (e.g., speed, volume, and density measures) and associated information (e.g., congestion, potential incidents). This flow includes the traffic data and the operational status of the traffic detectors

traffic image meta data  (Existing)  

Meta data that describes traffic images. Traffic images (video) are in another flow.

traffic images  (Existing)  

High fidelity, real–time traffic images suitable for surveillance monitoring by the operator or for use in machine vision applications. This flow includes the images. Meta data that describes the images is contained in another flow.

traffic metering control  (Existing)  

Control commands and operating parameters for ramp meters, interchange meters, mainline meters, and other systems equipment associated with roadway metering operations.

traffic metering status  (Existing)  

Current operational status and operating parameters for ramp meters, interchange meters, mainline meters and other control equipment associated with roadway metering operations.

traffic situation data  (Planned)  

Current, aggregate traffic data collected from connected vehicles that can be used to supplement or replace information collected by roadside traffic detectors. It includes raw and/or processed reported vehicle speeds, counts, and other derived measures. Raw and/or filtered vehicle control events may also be included to support incident detection.

vehicle signage application info  (Existing)  

In–vehicle signing application configuration data and messaging parameters. This flow provides a list of regulatory, warning, and information messages to be displayed and parameters that support scheduling and prioritizing messages to be issued to passing vehicles. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

vehicle signage application status  (Existing)  

In–vehicle signing application status reported by the RSE. This includes current operational state and status of the RSE and a log of messages sent to passing vehicles.

video surveillance control  (Existing)  

Information used to configure and control video surveillance systems.